¶
Main Items
Site Survey completed and approved by VergeIO
ISO downloaded and installed on a USB drive
Encryption Key USB installed and ready (if enabling encryption)
Nodes powered up with ISO booted to VergeIO Install screen
Crash cart ready if applicable
Remote screen share capability or remote IPMI access (WAN or VPN)
¶
Hardware
Hardware burn-in complete
All Drives setup for JBOD,
NO RAID
BIOS set to proper boot settings (Legacy / Dual / UEFI)
UEFI is required if all drives are NVMe
Redundant Power supplies setup and connected (recommended)
IPMI ports patched and configured
IPMI setup / configured / tested
Latest IPMI firmware (recommended)
Test IPMI remote console capability (in case of incorrect licensing)
¶
Network
All switches online and tested
All cables patched
All VLANs configured (core and external)
All switch ports configured (core and external)
2 NICs per node minimum and separate switches
Correct Supported SFP modules (if applicable)
Correct IPs validated and available
Need more Help? Email
support@verge.io
or call us at
(855) 855-8300
↺
Back to Knowledgebase
🚗 Take a Test Drive Today!
VergeOS documentation is moving soon. Check out our new documentation site at
docs.verge.io